// Guides // FeNau
Gratings in industry: walkways, working platforms and landings
In plant construction, grating is the standard floor – because it carries loads, lets light and sprinkler water through, does not burn and can be laid quickly. What DIN EN ISO 14122 and the DGUV require and how to achieve it economically.
1. What DIN EN ISO 14122 and the DGUV require
DIN EN ISO 14122-2 (working platforms and walkways on machinery) and the German accident insurance guidance DGUV Information 208-007 (gratings) are the regulations for industrial grating floors:
| Requirement | Value | Implementation on the grating |
|---|---|---|
| Openings in the floor | A ball of Ø 35 mm must not fall through | 30/30 (33/33) complies; closer mesh freely selectable |
| Above workstations / traffic routes below | Openings max. 20 mm | 30/20 or 30/10 |
| Point load | 1.5 kN on 200 × 200 mm, deflection ≤ L/200 (RAL-GZ 638) | Bearing bar by span, e.g. 30×2 up to 1200 mm |
| Distributed load | min. 2 kN/m²; DGUV: 5 kN/m² for gratings | Configurator: “pedestrian” = 5 kN/m² |
| Securing against slipping/lifting | every grating secured | min. 2, preferably 4 clips; double clips at joints |
| Kick plate | ≥ 100 mm high at fall edges | on the railing or as an edge angle |
| Slip resistance | sure footing, to ASR A1.5 / DGUV 108-003 R10–R12 | smooth indoors, serrated with oil/wet/outdoors |
| Joints / level differences | no trip points (> 4 mm) | same bearing bar height across the whole area, supports levelled |
2. Loads in plant construction
Besides people, tool trolleys, drums, gas cylinders, pumps and, during installation work, pallet trucks end up on the grating. Rules of thumb:
- Pure maintenance route: 1.5 kN / 5 kN/m² → 30 × 2 up to 1200 mm, 30 × 3 up to 1500 mm.
- Platforms with material storage: 7.5–10 kN/m² or point loads of 3–5 kN → 40 × 3 to 50 × 3 at 1000 mm.
- Industrial trucks, pallet trucks: wheel load 10–16 kN → 50 × 5 / 60 × 5 at 1000 mm or an intermediate support at 600 mm.
- Dynamics: platforms on machinery with vibration – clips with spring washers or bolted fixing, no loose supports.
All values are in the bearing bar table; for areas with many panels, an intermediate support (substructure grid 600–800 mm) almost always gives lighter and cheaper gratings.
3. Press-locked or electro-forged?
In plant construction the electro-forged grating dominates: standard panels 1000 × 1000 to 1000 × 1200 mm from stock, 10–25 % cheaper per m², twisted cross bars with good slip resistance, pitches 34/38 and 34/50. The press-locked grating is the choice when a fine mesh (30/10 above workstations), exact cut-outs, visual quality or stainless steel is required. Both carry loads according to the same bearing bar – comparison in the grating types guide. Standard panels: electro-forged gratings and industrial gratings from FeNau; cut-to-size and custom gratings with cut-outs for pipe penetrations via the configurator.
4. Design details that save trouble later
- Pipe penetrations: banded cut-outs with 10–20 mm clearance; for pipes added later, split gratings instead of cutting on site.
- Removable panels above pumps, fittings and valves: with hand recesses or lifting handles, weight ≤ 25 kg per panel (handling by one person).
- Kick plates / edge protection at all fall edges and openings; stair treads with nosing (grating stair treads).
- Earthing: connect the grating to equipotential bonding via a clip or earthing strap (hazardous areas, electrical installations).
- Marking: a position number per grating for projects with many panels – we supply parts lists and laying plans.
- Corrosion: dry hall → galvanised; wet areas, chemicals, food → 304/316 stainless steel; acid mist or chlorine gas → GRP (GRP gratings).
5. Typical installations
| Installation | Special feature | Recommendation |
|---|---|---|
| Machine surrounds, presses, packaging lines | Oil, swarf, vibration | SP 34/38 serrated, bolted, 30/20 above workstations |
| Ventilation/air-conditioning plant rooms, rooftop units | Maintenance routes, wind, wet | P 33/33 galvanised, 30 × 2, clips, frame at roof edges |
| Power stations, boilers, flue gas | Heat, dust, large areas | SP 34/50, 40 × 3, panels 1000 × 1200, intermediate supports |
| Chemicals, electroplating, wastewater treatment | Corrosion | 316 stainless steel or GRP – see wastewater treatment plants |
| Food, brewery, dairy | Hygiene, cleaning, water | Stainless steel 30/10 electropolished, R12 double serrated |
| Warehouses, rack platforms | Sprinklers, forklift traffic | see warehouses & shelf decks |
Questions and answers
Which openings are permitted in industrial gratings?
Under DIN EN ISO 14122-2, a ball of 35 mm must not fall through (30/30 complies); above workstations and traffic routes below, a maximum opening of 20 mm – i.e. 30/20 or 30/10.
What load must a walkway grating carry?
At least a 1.5 kN point load on 200×200 mm and a 5 kN/m² distributed load (DGUV 208-007), deflection ≤ L/200. Size it higher accordingly for material storage or pallet trucks.
Press-locked or electro-forged for industry?
Electro-forged for standard panels, halls and platforms (cheaper, robust); press-locked for fine mesh, exact cut-outs, stainless steel and visible areas.
How are industrial gratings fixed?
At least 2 clips per grating, 4 on platforms and traffic routes, double clips at joints, bolted where there is vibration; kick plates ≥ 100 mm at fall edges.
Do you supply parts lists for projects?
Yes – from a floor plan or laying plan we draw up the parts list with position numbers, mark every grating and deliver packed by construction phase.