// Guides // FeNau
Gratings for warehouses, shelf decks and storage platforms
In the warehouse, grating has an argument no other floor has: sprinkler water gets through. Shelf decks and platforms made of grating save in-rack sprinklers, light and weight – provided load and mesh are right.
1. Sprinklers and fire protection
Solid shelf decks (chipboard, sheet steel) shield the water from ceiling sprinklers – under VdS CEA 4001 and FM guidelines, in-rack sprinklers are then needed at every level: expensive, maintenance-intensive and redone with every reconfiguration. Grating decks with ≥ 50 % open area are, depending on the insurer and the regulations, regarded as “open” decks through which extinguishing water reaches the lower levels – a 30/30 press-locked grating has ≈ 80 %, 30/10 ≈ 70 %. In addition, steel is non-combustible (A1) and adds no fire load (chipboard: approx. 15 kg of wood per m²). Acceptance must be agreed with the property insurer and the fire safety concept; we supply the pitch, free area and data sheet.
2. Shelf decks
| Rack type | Typical shelf load | Grating | Note |
|---|---|---|---|
| Shelving (small parts) | 150–300 kg/shelf | 25 × 2 or 30 × 2, 30/10 | small parts do not fall through, cartons stand level |
| Long-span shelving | 500–1,000 kg/shelf, span 1,500–2,500 mm | 30 × 3 – 40 × 3 on intermediate beams (span ≤ 1,000 mm) | grating across the beams, panels ≤ 25 kg |
| Pallet racking with grating decks | 1,000–3,000 kg/level, point loads from pallet skids | 40 × 3 – 50 × 5 on beams 600–800 mm | check the point load per skid; pallet width + 100 mm |
| Tyre, pipe and long-goods racking | point loads | 30 × 3 serrated | serrations hold tyres and pipes |
Grating decks are laid on the beams and secured with clips – slipping when cartons are pulled out is the most common complaint about loose decks. Shelf loads as specified by the racking manufacturer (DIN EN 15635 rack inspection) remain decisive; the grating must not have to carry more than the beam.
3. Storage platforms and mezzanines
- Imposed load: storage platforms to DIN EN 1991-1-1 category E (storage) from 7.5 kN/m², often 10 kN/m²; point loads from pallet trucks (up to 16 kN wheel load) – bearing bar 40 × 3 to 60 × 5 depending on the beam grid (structural design).
- Mesh: 30/10 on platforms with workstations below (DIN EN ISO 14122-2: max. 20 mm opening), otherwise 30/30.
- Kick plates ≥ 100 mm at all edges, transfer points with a pallet gate, stairs with nosing (treads).
- Forklift traffic on the platform: grating across the direction of travel, 50 × 5 / 60 × 5 or intermediate beams at 600 mm; transitions flush.
- Light and air: ceiling lighting and sprinklers work through the platform; no additional lighting is needed under grating platforms in the mezzanine store if there is enough transmission.
- Type: electro-forged grating 34/38 or 34/50 for large, identical panels (economical), press-locked grating for cut-to-size work, cut-outs around columns and 30/10 (grating types).
4. Details that keep operations running smoothly
- Small parts: 30/10 prevents screws, labels and packaging from falling onto the levels below – occupational safety and cleanliness.
- Roll containers, pallet trucks: 30/10 runs more quietly; castors Ø ≥ 80 mm, polyurethane.
- ESD / electronics: steel grating is conductive – with earthing it becomes part of the ESD concept; use insulating GRP only deliberately.
- Food, pharma, cold stores: stainless steel, easy to clean, no zinc abrasion; cold store: grating without condensate traps.
- Marking: position numbers per panel for reconfigurations; keep spare panels in stock.
- Inspection: annual rack inspection to DIN EN 15635 – check grating decks for deformation and clips for secure fit.
Questions and answers
Do grating shelf decks replace in-rack sprinklers?
Often yes: grating decks with ≥ 50 % open area (30/30 ≈ 80 %, 30/10 ≈ 70 %) let water from ceiling sprinklers through and are rated as open decks by property insurers – approval is given via the fire safety concept and the insurer.
Which mesh for shelving?
30/10 – small parts and cartons stay on top and roll containers run quietly; 30/30 only for pallet and bulk racking.
How much does a grating shelf deck carry?
Depending on span: 30×2 at 1000 mm approx. 10 kN/m², 40×3 approx. 27 kN/m² (RAL-GZ 638). The shelf load of the rack beam as specified by the manufacturer remains decisive.
What imposed load does a storage platform have?
Under DIN EN 1991-1-1 category E, from 7.5 kN/m², typically 10 kN/m², plus point loads from pallet trucks (up to 16 kN wheel load) – bearing bar 40×3 to 60×5 depending on the beam grid.
Press-locked or electro-forged in the warehouse?
Electro-forged for large identical panels (cheaper), press-locked for cut-to-size work, cut-outs around columns, fine mesh 30/10 and stainless steel.