// Guides // FeNau

Slip resistance of gratings: choosing R10 to R13 correctly

Wet, oily, icy, sloping – a grating is inherently more grippy than sheet metal or tiles, but not automatically sufficient for every situation. Here are the classes, the regulations and the versions that meet them.

1. The R classes to DIN 51130

The slip resistance of floor coverings in workrooms is tested on an inclined plane: a person in standardised shoes walks on the oil-coated surface and the incline is increased until they slip. The angle gives the class:

ClassAngle of inclinationSlip resistanceGrating version
R96° – 10°low– (tiles, smooth floors)
R10> 10° – 19°normalsmooth press-locked / electro-forged grating
R11> 19° – 27°increasedsmooth grating in a dry environment, serrated bearing bar
R12> 27° – 35°highserrated bearing bar, electro-forged grating with serrated twisted cross bars
R13> 35°very highbearing and cross bars serrated (“double serrated”), safety gratings

The R class is a property of the tested product, not of the grating type in general – values depend on pitch, bar thickness and serration. For tenders with an R requirement, we send the test certificate for the grating.

2. What DGUV Rule 108-003 and ASR A1.5 require

The German workplace regulation ASR A1.5 (“Floors”) requires slip-resistant floors in workplaces according to the area of use; the classification is provided by DGUV Rule 108-003 (“Floors in workrooms and work areas with a risk of slipping”) with its table of work areas. Typical classifications that affect gratings:

  • Outdoor areas, external stairs, loading ramps (uncovered): R11 to R12 – this is where a serrated bearing bar belongs on gratings.
  • Workshops, warehouses, indoor traffic routes: R10 to R11 – a smooth grating is usually sufficient.
  • Kitchens, food, grease and oil: R12 to R13, often with displacement space – double-serrated stainless steel grating.
  • Ramps and stairs: one class higher than the adjacent area; treads additionally with a contrasting, slip-resistant nosing (DIN EN ISO 14122-3, ASR A1.8).

There is no mandatory class for private areas – but there is a duty of care. A smooth grating on a shady, icy external stair is the classic liability case; a serrated bearing bar costs little extra.

3. Smooth, serrated or double serrated?

VersionWhat is serratedClass (typical)Where it makes senseDrawbacks
Smoothnothing – grip comes from the mesh edgesR10–R11Light wells, yards, level walkways, terracesinsufficient with ice, oil or slopes
Serrated bearing bartop edge of the bearing bars sawn (serration ~ 2 mm)R11–R12External stairs, ramps, entrances, channel gratings at drivewaysuncomfortable barefoot, cleaning a little more involved
Double serratedbearing and cross bars serratedR12–R13Oil, grease, changing walking directions, industry, kitchensprice, appearance, not for bare feet
Electro-forged, twistedtwisted cross barsR11–R12 (serrated up to R13)Industry, platformscoarse appearance

Important for effectiveness: serrations help across the serrated bars. Serrated bearing bars therefore work when you walk across the bearing bar direction – which is why on stairs the bearing bars run across the walking direction (parallel to the tread edge). In the configurator, select “serrated” under slip resistance; standard gratings with serrations are under industrial gratings, treads under grating stair treads R10.

4. Barefoot areas: classes A, B, C to DIN 51097

Where people walk barefoot, it is not the R class (shoes, oil) that counts but the test with bare feet and soapy water to DIN 51097 (rating groups, DGUV Information 207-006):

  • A (≥ 12°): dry barefoot corridors, changing rooms.
  • B (≥ 18°): pool surrounds, showers, sauna areas, around paddling pools.
  • C (≥ 24°): steps leading into water, sloping pool edges, foot baths.

Serrated bars are off-limits here (risk of injury). Barefoot gratings achieve B and C through a fine pitch, rounded and deburred edges and special barefoot profiles – see the barefoot grating guide.

5. Decision table

ApplicationRecommendation
Light well, basement wellsmooth (R10–R11)
House entrance, terrace (level, covered)smooth; serrated on the weather side and north-facing
External stairs, escape stairsserrated bearing bar + nosing (R11–R12)
Ramp, sloping drivewayserrated bearing bar (R12)
Industry, workshop, indoor warehousesmooth to serrated (R10–R11)
Oil, grease, kitchen, fooddouble serrated, stainless steel (R12–R13)
Swimming pool, sauna, showerbarefoot grating B/C, 316, never serrated
Data centre, plant roomsmooth (R10); freedom from dust and abrasion matters more

Questions and answers

What slip resistance does a normal grating have?

Smooth press-locked and electro-forged gratings are typically R10 to R11. With a serrated bearing bar R11–R12, double serrated up to R13 – the exact value is in the test certificate of the specific grating.

When do I need a serrated grating?

On external stairs, ramps, loading ramps and entrances exposed to wet or ice (DGUV Rule 108-003: R11–R12), and with oil and grease (R12–R13).

What does R11 mean for a grating?

Slip resistance class to DIN 51130: on the oiled inclined plane, an angle of more than 19° up to 27° is reached – increased slip resistance.

Does the R class also apply to bare feet?

No. Barefoot areas use classes A, B and C to DIN 51097 (test with bare feet and soapy water). Serrated gratings are unsuitable there.

In which direction do serrations work?

Across the serrated bar. Serrated bearing bars work when you walk across the bearing bar direction – which is why on stairs the bearing bars run parallel to the tread edge.