// Guides // FeNau

Gratings in wastewater treatment plants, waterworks and pumping stations

Moisture, hydrogen sulphide, chlorine, cleaning agents – hardly any environment is as aggressive to steel as wastewater engineering. Which gratings last how long there, where GRP outperforms stainless steel and how to plan covers and walkways safely.

1. The environment: why normal gratings fail here

In screen houses, above primary clarifiers and in pump sumps, hydrogen sulphide (H₂S) forms and combines with moisture to produce sulphuric acid – corrosivity category C5 to DIN EN ISO 12944. Hot-dip galvanised steel loses 4–8 µm of zinc a year there and is corroded through after 8–15 years; in drinking water and swimming pool engineering, chlorine and chlorides also attack 304 stainless steel (pitting, stress corrosion cracking). Add constant moisture, high-pressure cleaning and – in digesters and gas areas – explosion protection.

2. Choice of material: 316 stainless steel or GRP?

CriterionSteel, hot-dip galvanisedStainless steel 316 (1.4571/1.4404)GRP (polyester / vinyl ester)
H₂S / wastewater atmosphere8–15 yearsvery goodvery good (vinyl ester also with acids)
Chlorine, chloridesunsuitablegood (304 unsuitable)very good
Load capacity / stiffnessvery highvery highmedium – greater build-up height, L/200 critical
Weightbaseas steelapprox. 50 % – an advantage for removable covers
Electricalconductiveconductiveinsulating (advantage with cathodic protection, electrolysis)
Slip resistanceserrated R12serrated R12quartz sand coating R12–R13, wears
Price per m²base2.5–3.5×1.5–2×
Typicaldry ancillary rooms, outdoor routeswalkways, stairs, load-bearing tank coverstank covers, channels, chemical rooms, retrofits

Rule of thumb: anything with load and fall protection in 316 (walkways, platforms, stairs), light covers and channels in GRP, galvanised only outside the wastewater atmosphere. 304 is no saving in wastewater treatment plants – surface rust and pitting after a few years. GRP gratings, treads and fixings: FeNau GRP; custom stainless steel gratings via the configurator.

3. Applications

  • Walkways and platforms over tanks: grating 316 30/30, bearing bar 30 × 3 to 40 × 3, kick plate ≥ 100 mm, railing to DIN EN ISO 14122-3; mesh 30/20 where tools could fall into the tank.
  • Tank covers, pit and channel covers: removable panels ≤ 25 kg, lifting handles, secured against slipping; GRP for large areas without traffic loads.
  • Screen house, grit chamber, pump sump: 316 or GRP, serrated (wet), cut-outs for screens, screw conveyors and pipes to drawing.
  • Stairs and landings: 316 grating stair treads with nosing, R12; GRP treads in chemical rooms.
  • Waterworks, service reservoirs: 316, electropolished or pickled – no zinc in the drinking water area.
  • Outdoor stormwater retention and drainage channels: trafficable channel gratings by load class, 316, or galvanised with a de-icing salt caveat.

4. Safety

  • Falling into the tank: railings, kick plates, no openings > 35 mm; removable panels releasable only with a tool.
  • Slip resistance: permanently wet → R12 (serrated) according to DGUV Rule 108-003; bare feet are not an issue, so serrations are allowed.
  • Hazardous areas (digester, gas room): conductive gratings bonded to equipotential bonding; GRP only in a conductive version.
  • Fixing: stainless steel clips (A4); for a stainless steel grating on a galvanised substructure, an EPDM separating layer against galvanic corrosion (fixing).

5. Planning and tendering

  1. Define zones: wastewater atmosphere (C5), wet area, dry ancillary rooms – define the material for each zone.
  2. Loads per area: maintenance (1.5 kN), material transport (3–5 kN), vehicles (load class) – see structural design.
  3. Panel layout according to the substructure and handling (≤ 25 kg per removable panel).
  4. Specification text: “Press-locked grating to RAL-GZ 638 / DIN 24537-1, material 1.4571, pitch 33/33, bearing bar 30 × 3, serrated R12, edge banding, A4 clips, with cut-outs as per drawing” – we supply position lists and drawings for the tender.

Questions and answers

Which material for gratings in a wastewater treatment plant?

In the wastewater atmosphere (H₂S, moisture), 316 stainless steel (1.4571/1.4404) for load-bearing walkways and stairs, GRP for light covers and channels. Galvanised steel lasts only 8–15 years there, and 304 suffers pitting.

When is GRP better than stainless steel?

For large, light covers without traffic loads, in chemical rooms with acids (vinyl ester) and where electrical insulation is required. For high loads and low build-up heights, stainless steel is superior.

Which mesh over clarifier tanks?

30/30 for walkways (35 mm ball to DIN EN ISO 14122-2); 30/20 or 30/10 where tools could fall into the tank or people work below.

How heavy can a removable cover be?

For handling by one person, ≤ 25 kg per panel – divide the panel size accordingly, provide lifting handles and secure against slipping.

Do you supply specification texts and drawings?

Yes, with position lists, material details, proof of load capacity to RAL-GZ 638 and drawings for cut-outs.