// Guides // FeNau
Gratings for terraces, balconies and roof terraces
Grating flooring is permeable to water, non-combustible, maintenance-free and still looks like new after 20 years. To keep it from feeling like an industrial walkway, four things matter: design load, deflection, mesh and substructure.
1. Why grating as terrace and balcony flooring
- Water drains away immediately – no puddles, no black ice, no fall needed; rain and meltwater go into the waterproofing layer below or the gravel strip.
- Non-combustible (A1) – relevant for balconies serving as a second escape route and for roof terraces above fire compartments, where timber and WPC decking trigger restrictions.
- Light and maintenance-free: 21–37 kg/m² instead of 80–120 kg/m² for concrete slabs; hot-dip galvanised lasts 30–50 years without care.
- Light and air for rooms and façades below – on access decks, walkways and balconies above living spaces, a building physics argument.
- Removable: gratings sit loose on clips, and each grating can be lifted to inspect the waterproofing.
2. Loads and bearing bar
Balconies and terraces of residential buildings are usually designed to DIN EN 1991-1-1/NA with an imposed load of 4.0 kN/m² (category Z: balconies, access decks, roof terraces), plus the 1.5 kN point load on 200 × 200 mm for the grating itself. Ground-level terraces in the garden are usually treated as the 1.5 kN case (pedestrian). For gratings this means:
| Span between supports | Bearing bar, structural (1.5 kN / 4 kN/m²) | Recommendation with comfort margin (L/300) | Weight |
|---|---|---|---|
| 500 mm | 25 × 2 | 25 × 2 | 18 kg/m² |
| 600 mm | 25 × 2 | 30 × 2 | 21 kg/m² |
| 800 mm | 30 × 2 | 30 × 3 | 30 kg/m² |
| 1000 mm | 30 × 2 | 40 × 2 / 40 × 3 | 26–37 kg/m² |
| 1200 mm | 30 × 3 | 40 × 3 | 37 kg/m² |
Structural adequacy alone is not enough on terraces: a grating that deflects 5 mm underfoot is safe but feels “soft”. That is why a maximum deflection of L/300 is recommended for floors where people spend time – one bearing bar size up from what is needed, or a closer substructure grid. Values from the bearing bar table; the configurator calculates both.
3. Mesh and walking comfort
- 30/10 (33/11) is standard on terraces and balconies: safe for heels, chair legs and children's feet stay on top, small items do not fall through; still around 70 % light transmission.
- 30/30 only on walkways and maintenance routes where nobody lingers.
- The grating becomes barefoot-friendly with openings ≤ 8 mm and rounded edges (barefoot grating) – for pool decks and sauna terraces.
- Laying direction: bearing bars in the walking direction or towards the house wall, so the fine pitch lies crosswise and furniture legs do not slip into the long slots.
- Slip resistance: smooth (R10–R11) is enough for level areas; serrated at stair heads and on north-facing sites (R12).
4. Substructure and drainage
| Base | Substructure | Note |
|---|---|---|
| Concrete balcony slab (existing) | Adjustable pedestals with stainless steel angle supports or rubber grating supports | height-adjustable, waterproofing stays intact; grating clipped onto the supports |
| Steel balcony, bolt-on balcony | Grating directly on the angle/T sections of the balcony frame | bearing bar direction across the beams, clips at every beam |
| Roof terrace / flat roof | Pedestals on protection mats, grating on aluminium or steel sections | free drainage to the gutter, grating removable for roof maintenance |
| Ground-level terrace | Steel sections on pad foundations or concrete strips | gravel soakaway layer underneath, weed membrane, grating 10–20 mm above ground |
| Timber substructure | Grating on structural timber/larch beams with an EPDM separating layer | fixed with clips and wood screws; timber must be able to dry under the grating |
The water under the grating also has to go somewhere: fall of the waterproofing ≥ 1.5–2 % (flat roof guidelines), drains freely accessible, and on balconies a drip edge towards the façade. Frames or edge angles prevent gravel or leaves from migrating under the grating. Joints between gratings 3–5 mm, 5–10 mm to the wall – connect rows of gratings with double clips and nothing will rattle.
5. Material and appearance
- Hot-dip galvanised: standard for gardens and yards, grey, lively zinc spangle, 30–50 years.
- Duplex powder-coated (e.g. anthracite RAL 7016, black RAL 9005): matched to the façade, 1.5–2.3 times the protection period – but the coating on the walking surface wears in heavily used spots.
- Stainless steel 304: entrances, exposed balconies, roof terraces in town; 316 on the coast and with chlorinated pool water (materials).
- Galvanic corrosion: separate a galvanised grating from aluminium pedestals or copper sheet (EPDM), otherwise the zinc sacrifices itself.
- Glare: new galvanising reflects in the sun – matt after a year; if you do not want that, choose duplex or pickled stainless steel.
6. Project process
- Site survey: internal dimensions between railing posts, wall and edge, centre-to-centre spacing of the substructure (= span), cut-outs for posts, drains, downpipes.
- Panel layout: choose grating widths so that each grating can be carried without lifting gear (≤ 1000 × 1000 mm, ≤ 35 kg) – parts list with position numbers.
- Configuration: span as the first dimension, use “pedestrian”, mesh 30/10, material, order clips as well.
- Installation: level the supports, lay the gratings, double clips at the joints, 4 clips per grating at the edge, check the drains.
Questions and answers
Is a grating suitable as a balcony floor?
Yes – permeable to water, non-combustible (A1), light at 21–37 kg/m² and removable for access to the waterproofing. The imposed load to DIN EN 1991-1-1 category Z (4 kN/m²) is achieved with a 30×2 to 40×3 bearing bar depending on the beam spacing.
Which mesh makes sense on a terrace?
30/10 (33/11) – safe for heels and chair legs, child-friendly, approx. 70 % light transmission. For barefoot areas by the pool, openings ≤ 8 mm.
How do I stop the grating feeling “springy”?
Limit deflection to L/300: a substructure grid of 600–800 mm or a bearing bar one size up from what the structure requires.
How is a grating laid on an existing concrete balcony?
On adjustable pedestals or rubber grating supports with steel/aluminium sections, without drilling through the waterproofing; gratings secured with clips.
Grating in anthracite – is that possible?
Yes, as a duplex system (hot-dip galvanised + powder coating RAL 7016). On heavily used walking surfaces the coating wears; an alternative is pickled stainless steel.