// Guides // FeNau

Gratings at schools, nurseries, hospitals and public buildings

Where many people – and particularly vulnerable people – walk, the mesh decides accessibility, finger safety and liability. What DIN 18040 and DIN EN 1176 specify and how gratings are designed at entrances, school yards and playgrounds.

1. Accessibility to DIN 18040

Publicly accessible buildings must be accessible without barriers under DIN 18040-1 (and dwellings under 18040-2). For gratings and covers in routes this means: wheelchairs, rollators, pushchairs and long white canes must be able to cross safely – in practice openings ≤ 10 mm in the walking direction, i.e. mesh 30/10 (33/11) with the narrow dimension across the walking direction, level difference ≤ 2 cm (preferably flush), tactile detectability (the grating stands out from the paving) and no trip edge at the frame. Ramps ≤ 6 %, grating serrated and laid crosswise. Details in the mesh size guide.

2. Children and finger safety

Nurseries, primary schools and playgrounds are additionally subject to DIN EN 1176 (playground equipment) and the accident prevention regulations of the statutory accident insurers: finger traps are openings between 8 and 25 mm. A 30/10 grating, at 10 mm, falls exactly in this range – which is why:

AreaMeshReason
Playground, crèche outdoor area, impact areasOpenings ≤ 8 mm (barefoot/child pitch) or ≥ 30/30no finger trap under DIN EN 1176; 30/30 only outside areas where children spend time
School yard, paths, entrances30/10accessible, safe for heels; the finger trap rule applies to play equipment, not traffic routes
Light wells at school buildings30/10, securedchildren cannot lift it, no small items in the well
Water playground, paddling pool≤ 8 mm, 316, rounded edgesbarefoot, wet – see barefoot grating

In addition: no serrated bars in children's areas (grazes), deburred edges, gratings secured against lifting.

3. Entrances and entrance matting zones

  • Entrance grating in front of the door: 30/10 in a frame, bearing bar 30 × 2, as a dirt trap over a pit or gravel bed – removes coarse dirt before the mat and drains.
  • Canopy drainage: channel grating 30/10 across the walking direction, flush, frame, clips; 304 stainless steel at prestigious entrances.
  • Slip resistance: entrances R10–R11, ramps R11–R12 (DGUV 108-003) – serrated only outside children's areas.
  • Contrast: visually impaired people need gratings they can see – galvanised on dark paving or duplex in a contrasting colour; do not interrupt tactile paving to DIN 32984 with gratings.

4. School yard, light wells, playground, sports facilities

  • Light wells in the school yard: 30/10, pedestrian 1.5 kN (crowds: 5 kN/m²), safety chains or lockable clips against lifting – pupils lift gratings; trafficable on fire brigade access routes (light well).
  • Drainage channels in the yard and on sports pitches: span = channel width, 30/10 or slot grating, suitable for balls, frame.
  • Tree grilles in the school yard and on squares: 30/10 tree grilles on a frame (landscaping).
  • Escape stairs at schools and hospitals: close-mesh treads with nosing, R11–R12, handrails on both sides (escape stairs).
  • Plant and ventilation: ventilation gratings in front of plant rooms as louvres (no views in, vandal protection), cable duct covers with locks.

5. Vandalism, theft, liability

  • Theft: stainless steel gratings are a target for scrap thieves – safety chains, lockable clips or fixing from the inside; securing is mandatory for wells.
  • Vandalism: bearing bar one size higher than structurally necessary, 5 mm edge banding, no loose panels, frames cast in concrete.
  • Duty of care: the operator is liable for trip hazards and finger traps – document an annual visual inspection of the gratings (secure, flush, undamaged); DGUV 208-007 as the basis for inspection.
  • Tender: “Press-locked grating RAL-GZ 638, pitch 33/11, bearing bar 30×2, hot-dip galvanised DIN EN ISO 1461, edge banding, frame, secured against lifting” – we supply the parts list and evidence.

Questions and answers

Which mesh size is required in public buildings?

Under DIN 18040, gratings must be safe for wheelchairs, rollators and canes – in practice 30/10 (openings ≤ 10 mm across the walking direction), laid flush.

Which mesh on playgrounds and in nurseries?

Finger traps of 8–25 mm must be avoided under DIN EN 1176: openings ≤ 8 mm (child pitch) or 30/30 outside areas where children spend time; no serrated bars, rounded edges.

How do I secure light well gratings in a school yard?

With safety chains, lockable clips or fixing from the inside; grating 30/10, pedestrian with a reserve for crowds (5 kN/m²).

Do gratings at public buildings have to be inspected?

The operator has a duty of care – regular documented visual inspection (secure, flush, undamaged) in accordance with DGUV Information 208-007.

Stainless steel or galvanised at a school entrance?

Galvanised is sufficient and economical; 304 stainless steel at prestigious entrances – then with theft protection.