// Guides // FeNau

Gratings for jetties, marinas and waterfronts

By the water, the material decides how long a grating lasts. Here is which grating belongs on which jetty, how it stays slip-resistant and how to fix it securely.

1. Material by water type

  • Inland lake, river, pond: steel, hot-dip galvanised to DIN EN ISO 1461 – as a standard jetty grating from stock or as a made-to-measure grating.
  • Coast, brackish water, salt water: made-to-measure grating in 316 stainless steel. Zinc wears away much faster there.
  • 304 stainless steel is not suitable for salt water; it develops rust spots and pitting.
  • FeNau does not supply aluminium jetty gratings.

2. Jetty grating from stock

The standard jetty grating is the hot-dip galvanised barefoot grating 250 × 1000 × 25 mm: bearing bar 25/2 mm, closely set U-profiles, flat bar side banding, steel S235JR. It is stocked in our pick-up warehouse in Langenzenn. "Barefoot grating" is a model name and not a guarantee that it can be walked on barefoot; check and deburr the edges before installation.

3. Slip resistance with water and algae

Algae and water make every surface slippery – a grating stays grippier than timber or concrete thanks to its edges and drainage. On work jetties and slipways used with shoes, a serrated grating (R12) makes sense. On bathing jetties and in marinas where people walk barefoot, no serration: use fine-mesh gratings and deburr the edges before installation. Walking barefoot is at your own risk.

4. Fixing

  • Lay bearing bars from beam to beam with sufficient support on each side.
  • On timber jetties fix with grating clamps and stainless steel wood screws, with an EPDM separating layer between grating and timber.
  • Use double clamps at the joints; with wave action and ice, screw down instead of only clamping.
  • Order cut-outs for ladders, bollards and piles with the grating – cutting later destroys the galvanising.

5. Sizes and special shapes

Plan rectangular gratings with cut-outs in the configurator – galvanised, 304 or 316, with the price shown instantly. Curved segments and special shapes are handled by our advisors in Langenzenn: send a sketch with dimensions to gitterroste@fenau.eu.

Questions and answers

Which grating for a jetty on a lake?

On inland lakes, hot-dip galvanised steel – as a standard jetty grating from stock or as a made-to-measure grating.

Which grating for jetties by the sea?

In coastal and brackish water, a made-to-measure grating in 316 stainless steel. Galvanised steel lasts much shorter there, and 304 develops pitting.

Are aluminium jetty gratings available?

No. FeNau supplies jetty gratings hot-dip galvanised; for salt water there are made-to-measure gratings in 316 stainless steel.

May a jetty grating be serrated?

On work and slipway areas used with shoes, yes (R12); on bathing jetties and in marinas where people walk barefoot, no. Use fine-mesh gratings without serration there, and check and deburr the edges before installation.

How do I fix gratings on a timber jetty?

With clamps and stainless steel wood screws, an EPDM separating layer between grating and timber, double clamps at the joints; with wave action and ice, screw down instead of only clamping.