// Branche // FeNau
Gratings for metalworkers and fabricators
Metalworkers and fabricators install gratings in stairs, landings, platforms and walkways – almost always made to measure to suit their own substructure. FeNau manufactures press-locked gratings, electro-forged gratings and grating stair treads in the required size, mesh and finish, so on site they only need to be laid and fixed.

Installation points
Stairs and grating stair treads
Grating stair treads with end plates and slip-resistant nosing for external, escape and industrial stairs – made to suit the stringer spacing.
Landings and working platforms
Floor gratings for intermediate landings, assembly platforms and machine platforms, with bearing bars sized to span and imposed load.
Walkways and maintenance routes
Narrow gratings for walkways on plant, silos and roofs – slip-resistant, permeable to light and water, and quick to install.
Balconies and access decks
Hot-dip galvanised or stainless steel gratings for balcony floors, access decks and canopies, also with cut-outs for columns and railing posts.
Specification
| Feature | Specification |
|---|---|
| Type | Press-locked or electro-forged |
| Mesh | 30/30, 30/10 or as specified |
| Material | Steel, hot-dip galvanised, or stainless steel |
| Slip resistance | R10 to R13 |
| Dimensions | Made to measure, also with cut-outs |
| Installation | Laid, clipped or bolted |
In the guide
Questions and answers
Does FeNau supply gratings to the exact size of my substructure?
Yes. Length, width, bearing bar height and mesh size are set in the configurator, so the grating is made to fit your substructure. How to measure correctly and which tolerances to observe is explained in the guide on measuring and ordering.
Press-locked or electro-forged – which suits stairs and platforms?
Electro-forged gratings are particularly robust and suit heavily loaded platforms, stages and industrial stairs. Press-locked gratings have a finer, even mesh pattern and are often used in visible areas. What matters are the span and load, which determine the size of the bearing bar.
Are grating stair treads available with nosing?
Yes. Grating stair treads are made with end plates for fixing to the stair stringer and can have a slip-resistant nosing that makes the front edge of the tread clearly visible.
How are gratings fixed to the substructure?
Depending on the installation, gratings are laid and secured with clips or bolted; stair treads are bolted through the end plates. What matters is sufficient support width and securing against lifting and slipping.
More industries
- Ventilation gratings for data centresIn the cold aisle, free area is what matters. A press-locked grating lets more air through than a perforated plate and carries racks and pallet trucks.
- Gratings for energy and building servicesIn plant rooms the grating carries cable trenches, maintenance routes and ventilation. The load comes from foot traffic and trolleys, not from a machine hall.
- Gratings for industry and manufacturingOn the walkway, what counts is the mesh underfoot and the load over the span. Oil and moisture decide the slip resistance.
- Gratings for water and wastewaterAbove tanks and channels the surface is wet. Material and slip resistance come before the mesh.
- Gratings for parking and trafficIn the driving lane the grating carries the vehicle, not just people. Channel, entrance and light well are designed separately.
- Gratings for food and pharmaZinc has no place in the wet zone. The grating is stainless steel, the mesh is close and the surface can be hosed down.
- Gratings for public buildingsWhere many people walk, the mesh decides. Accessibility, finger safety and a slip-resistant entrance come before appearance.
- Gratings for housingAt the house, the opening is the measure. Light well, plinth and basement stairs are ordered to the clear internal dimension.
- Gratings for Paint BoothsIn the paint booth the car stands on the grating and the air passes through it. Usually it is mesh 60/30, designed for the car load.