// Branche // FeNau

Gratings for industry and manufacturing

On the walkway, what counts is the mesh underfoot and the load over the span. Oil and moisture decide the slip resistance.

Galvanised grating walkway with handrail in a production hall
Production, walkway at the plantExample, not a specific project

Installation points

  1. Walkway

    Continuous route along the plant. Bearing bars across the walking direction.

  2. Working platform

    Area in front of the machine, with cut-outs for columns and pipes.

  3. Machine platform

    Raised standing area, connected to the platform.

  4. Stairs

    Grating stair treads with nosing where the route changes level.

Specification

FeatureSpecification
TypePress-locked or electro-forged, depending on mesh and load
Mesh30/30 as the starting point, closer where heels get caught
MaterialHot-dip galvanised; stainless steel in wet or chemical zones
Slip resistanceSerrations where there is oil, grease or moisture
DimensionsWalkway and platform to site measurements, treads to the rise-to-going ratio
InstallationResting on the steel structure, clipped against lifting

In the guide

Questions and answers

Which way do the bearing bars run?

Across the walking direction, over the shorter span. That way the grating carries the load it was designed for.

Which mesh on a traffic route?

30/30 is the usual starting point. Closer where small parts or heels must not go through the mesh.

Do you supply the railing as well?

The grating is the floor panel. Railing and substructure remain with the steel fabricator; we take the connection dimensions from the plan.

Are custom stair treads available?

Standard treads are available at fenau.eu. Custom treads and series are handled by our advisers.

More industries