// Guides // FeNau
GRP gratings: types, stair treads, railings and ladders
Glass-fibre reinforced plastic does not rust, does not conduct electricity and is much lighter than steel. Here is which GRP type fits which purpose and which system parts belong to it.
1. Moulded GRP gratings
In a moulded grating the bars run at full height in both directions. This gives an even, high load capacity in both directions. The glass content is at most 40 %.
2. Pultruded I- and T-profile gratings
Bearing and cross bars are pultruded profiles with about 68 % glass content. This makes them stiffer than moulded gratings and allows longer spans.
3. Safety floor, sandwich gratings, floor plates
- Safety floor: GRP grating with a laminated GRP plate as a closed walking surface.
- Sandwich gratings: GRP grating with plates on top and bottom, standard plate thickness 3 mm, up to 5 mm possible.
- Safety floor plates: 3 mm GRP plates with corundum-sanded surface for retrofitting slip resistance on existing areas.
4. Stair treads, railings, ladders
- Moulded GRP stair treads with a closed, sanded nosing in black, optionally yellow.
- Standard railing with handrail, single or double knee rail and toe board to DIN EN ISO 14122-3.
- Round tube railing made of GRP tubes (D = 50 mm), glued with GRP fittings and riveted.
- Infill bar railing against falling or climbing through, often used in public areas.
- Ladders made of pultruded profiles to DIN EN ISO 14122-4, plus self-closing passage barriers.
- Height-adjustable feet made of polypropylene.
5. When GRP instead of steel?
GRP shows its strengths where steel would corrode or conduct electricity: sewage plants, chemicals, electrical and railway areas. Compared with steel, GRP is less stiff and combustible; details are in the materials guide. For chemical resistance there is a manufacturer's resin matrix, which our advisors check against your medium.
GRP gratings are not available in the configurator. Type, dimensions and surface are clarified by our advisors in Langenzenn.
Questions and answers
What is the difference between moulded and pultruded GRP gratings?
Moulded gratings carry evenly in both directions, glass content at most 40 %. Pultruded profile gratings have about 68 % glass content, are stiffer and span further.
Are GRP gratings available with a closed surface?
Yes, as a safety floor with a laminated plate or as a sandwich grating with plates on top and bottom.
Can I retrofit slip resistance to an existing area?
Yes, with 3 mm GRP safety floor plates with a corundum-sanded surface.
Can I order GRP gratings in the configurator?
No. GRP gratings and systems are available on request from our advisors: gitterroste@fenau.eu or +49 911 97917230.